Alloy Steel P5 / T5 Seamless Pipes Manufacturer & Supplier

Alloy Steel P5 / T5 is known for its high tensile strength and excellent resistance to high temperatures. This grade exhibits good toughness and is often employed in power generation and petrochemical applications. Its ability to withstand heat makes it ideal for the construction of boilers, pressure vessels, and piping systems.

UNS: K41545 | Category: Alloy Steel | Werkstoff Nr: 1.7362 | EN Name: X5CrMoViNb 9-1-1

Size Range

Outer Diameter: 1/4" to 16" NPS

Wall Thickness: 0.5 mm to 25.4 mm (SCH 5S to SCH 160 / XXS)

Physical Properties

Density
7.85 g/cm3
Melting Range
1425-1460 C
Thermal Conductivity
44 W/m-K
Electrical Resistivity
0.00065 ohm-m
Specific Heat
490 J/kg-K
Coeff. of Thermal Expansion
13.0 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
Not Applicable
Max Service Temp (Oxidizing)
600 C
Intergranular Corrosion
Resistant under normal service conditions
Stress Corrosion Cracking
Moderately resistant in chloride environments
General Corrosion Rate
<0.25 mm/yr in reducing environments
Seawater Resistance
Not recommended

Applicable Standards

Applications

Key Advantages

Equivalent Grades

ASTM
A335 P5
JIS
SCM435
BS
BS 4872-2
GOST
15CrMo

Frequently Asked Questions

What are the equivalent grades of Alloy Steel P5 / T5?

Nearest equivalents of Alloy Steel P5 / T5: A335 P5 (ASTM), SCM435 (JIS), BS 4872-2 (BS), 15CrMo (GOST). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Tubulars supply Alloy Steel P5 / T5 to?

Alloy Steel P5 / T5 is supplied to ASTM A335 and ASME SA335.

What sizes of Alloy Steel P5 / T5 are available?

1/4" to 16" NPS.

What is Alloy Steel P5 / T5 used for?

Alloy Steel P5 / T5 is used for Power generation piping systems, Fossil fuel-fired power plants and Petrochemical industrial applications.

Last updated: