Alloy Steel P9 / T9 Seamless Pipes Manufacturer & Supplier

Alloy Steel P9 / T9 is a chromium-molybdenum steel offering excellent mechanical properties and resistance to oxidation at high temperatures. It is commonly used in applications involving pressure vessels and piping systems in power plants. Its superior toughness and strength make it suitable for high-pressure environments.

UNS: S50400 | Category: Alloy Steel | Werkstoff Nr: 1.7380 | EN Name: X20CrMoV121

Size Range

Outer Diameter: 1/4" to 16" NPS

Wall Thickness: 0.5 mm to 25.4 mm (SCH 5S to SCH 160 / XXS)

Physical Properties

Density
7.85 g/cm3
Melting Range
1425-1470 C
Thermal Conductivity
25.5 W/m-K
Electrical Resistivity
0.7 nOhm-m
Specific Heat
460 J/kg-K
Coeff. of Thermal Expansion
11.5 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
N/A
Max Service Temp (Oxidizing)
600 C
Intergranular Corrosion
Not susceptible due to composition
Stress Corrosion Cracking
Moderately resistant
General Corrosion Rate
<0.1 mm/yr in typical service conditions
Seawater Resistance
Limited - not recommended for marine applications

Applicable Standards

Applications

Key Advantages

Equivalent Grades

ASTM
A335 P9
JIS
SUS 304J1
BS
25CrMo4
GOST
15CrMo5

Frequently Asked Questions

What are the equivalent grades of Alloy Steel P9 / T9?

Nearest equivalents of Alloy Steel P9 / T9: A335 P9 (ASTM), SUS 304J1 (JIS), 25CrMo4 (BS), 15CrMo5 (GOST). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Tubulars supply Alloy Steel P9 / T9 to?

Alloy Steel P9 / T9 is supplied to ASTM A335, ASME SA335, ASTM A213 and ASME SA213.

What sizes of Alloy Steel P9 / T9 are available?

1/4" to 16" NPS.

What is Alloy Steel P9 / T9 used for?

Alloy Steel P9 / T9 is used for High-temperature and high-pressure applications, Power generation piping and Chemical processing equipment.

Last updated: