Stainless Steel 410 Seamless Pipes & Tubes Manufacturer & Supplier
Stainless Steel 410 is a martensitic stainless steel with good hardness and moderate corrosion resistance. It is widely used in applications requiring high strength and moderate corrosion resistance, such as in the manufacturing of cutlery, pumps, and marine applications. The ability to be heat-treated makes it suitable for various demanding applications.
UNS: S41000 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4006 | EN Name: X12Cr13
Size Range
Wall Thickness: 5 mm to 50 mm
Physical Properties
- Density
- 7.70 g/cm3
- Melting Range
- 1480-1530 C
- Thermal Conductivity
- 25.4 W/m-K
- Electrical Resistivity
- 750 nOhm-m
- Specific Heat
- 480 J/kg-K
- Coeff. of Thermal Expansion
- 18.0 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- ~13
- Max Service Temp (Oxidizing)
- 600 C
- Intergranular Corrosion
- Not resistant
- Stress Corrosion Cracking
- Susceptible in chloride environments
- General Corrosion Rate
- <0.1 mm/yr in non-oxidizing acids
- Seawater Resistance
- Moderate - may experience pitting
Applicable Standards
- ASTM A312 / ASME SA312
- ASTM A276 / ASME SA276
Applications
- Cutlery and kitchen utensils
- Pump components and valves
- Marine and automotive applications
Key Advantages
- Good strength and hardness
- Moderate corrosion resistance
- Can be heat treated for enhanced performance
Equivalent Grades
- ASTM
- TP410
- JIS
- SUS 410
- BS
- 410S21
- GOST
- 12Kh13
Frequently Asked Questions
What are the equivalent grades of SS 410?
Nearest equivalents of SS 410: TP410 (ASTM), SUS 410 (JIS), 410S21 (BS), 12Kh13 (GOST). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Tubulars supply SS 410 to?
SS 410 is supplied to ASTM A312 / ASME SA312 and ASTM A276 / ASME SA276.
What is SS 410 used for?
SS 410 is used for Cutlery and kitchen utensils, Pump components and valves and Marine and automotive applications.
Last updated: