Titanium Grade 1 Seamless Pipes & Tubes Manufacturer & Supplier
Titanium Grade 1 is the most commercially pure titanium grade available, notable for its excellent corrosion resistance and high strength-to-weight ratio. It is widely used in various applications including aerospace, chemical processing, and marine environments due to its superior weldability and formability.
UNS: R50250 | Category: Titanium | Werkstoff Nr: 3.7025 | EN Name: Ti Grade 1
Physical Properties
- Density
- 4.51 g/cm3
- Melting Range
- 1668-1885 C
- Thermal Conductivity
- 15.2 W/m-K
- Electrical Resistivity
- 160 nOhm-m
- Specific Heat
- 520 J/kg-K
- Coeff. of Thermal Expansion
- 8.6 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- Not applicable
- Max Service Temp (Oxidizing)
- 600 C
- Intergranular Corrosion
- Not susceptible
- Stress Corrosion Cracking
- Resistant to stress corrosion cracking in many environments
- General Corrosion Rate
- Very low in many media
- Seawater Resistance
- Excellent resistance to seawater
Applicable Standards
- ASTM B337
- ASTM B861
- ASME SB337
Applications
- Aerospace components
- Chemical processing equipment
- Marine applications, including boat and ship parts
Key Advantages
- Excellent corrosion resistance in various environments
- High strength-to-weight ratio
- Good weldability and formability
Equivalent Grades
- ASTM
- Grade 1
- JIS
- T-7061
- BS
- Ti 1
- GOST
- VT6
Frequently Asked Questions
What are the equivalent grades of Titanium Grade 1?
Nearest equivalents of Titanium Grade 1: Grade 1 (ASTM), T-7061 (JIS), Ti 1 (BS), VT6 (GOST). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Tubulars supply Titanium Grade 1 to?
Titanium Grade 1 is supplied to ASTM B337, ASTM B861 and ASME SB337.
What is Titanium Grade 1 used for?
Titanium Grade 1 is used for Aerospace components, Chemical processing equipment and Marine applications, including boat and ship parts.
Last updated: